Substrate Preparation: To get optimum results, proper substrate preparation is essential. Remove rust, dust, grease etc from the surface. Clean the surface with sand-paper followed by degreasing with TRICHLOROETHYLENE or ACETONE.

Two parts (RESIN & HARDENER) which are supplied in equal volume, individually wrapped and sealed to be mixed in the ratio of 1:1 by volume or weight.

RESIN (Blue) & HARDENER (Red) are in different contrast colours to help users to know the uniform mixing. Mix thoroughly with both hands by rolling & kneading until uniform colour is attained. It takes about 2 minutes to get a uniform mix